Useful Information
46
Caller ID/Talking Caller ID
*1 KX-TG6542
Problem Cause/solution
Caller information is not
displayed.
L You must subscribe to Caller ID service. Contact
your service provider/telephone company for
details.
L If your unit is connected to any additional
telephone equipment such as a Caller ID box or
cordless telephone line jack, plug the unit directly
into the wall jack.
L If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base
unit and the telephone line jack. Contact your
DSL/ADSL provider for details.
L Other telephone equipment may be interfering
with this unit. Disconnect the other equipment and
try again.
Caller information is not
announced.
L The handset or base unit’s ringer volume is turned
off. Adjust it (page 14, 22).
L The Talking Caller ID feature is turned off. Turn it
on (page 23).
L The number of rings for the answering system is
set to “2 rings” or “Toll saver”. Select a
different setting (page 36).
L If the base unit and another handset are having an
intercom call, your handset does not announce
caller information.
*1
Caller information is
displayed or announced
late.
L Depending on your service provider/telephone
company, the unit may display or announced the
caller’s information at the 2nd ring or later.
L Move closer to the base unit.
Time on the unit has
shifted.
L Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to
“Manual” (off) (page 22).
TG654xBX(e).book Page 46 Tuesday, June 28, 2011 10:16 AM
To Next Page
Loading...
