Useful Information
48
Registering a handset to the base unit
1 Handset:
{MENU} i {#}{1}{3}{0}
2 Base unit:
Press and hold {LOCATOR} for about 5 seconds until the registration tone
sounds.
L If all registered handsets start ringing, press the same button to stop. Then
repeat this step. (KX-TG6542)
L The next step must be completed within 90 seconds.
3 Handset:
Press {OK}, then wait until a long beep sounds.
Note:
L While registering, “Base in registering” is displayed on all registered
handsets. (KX-TG6542)
Deregistering a handset
1 {MENU} i {#}{1}{3}{1}
L All handsets registered to the base unit are displayed.
2 {V}/{^}: Select the handset you want to cancel. i {SELECT}
3 {V}/{^}: “Yes” i {SELECT}
4 {OFF}
TG654xBX(e).book Page 48 Tuesday, June 28, 2011 10:16 AM
To Next Page
Loading...
