Panasonic KX-TG6561AL - Programming Unit Settings; Programming via Direct Commands

Programming
23
For the answering system
*1 If “System” column is checked, you do not need to program the same item using
another handset.
Recall/Flash
*8
{1}{2}{1}{0}: 900 msec.
{1}: 700 msec.
{2}: 600 msec.
{3}: 400 msec.
{4}: 300 msec.
{5}: 250 msec.
{*}: 200 msec.
{#}: 160 msec.
{6}: 110 msec.
{7}: <100 msec.>
{8}: 90 msec.
{9}: 80 msec.
r 16
Privacy Mode
*9
{1}{9}{4}{1}: On {0}: <Off> r –
Base Unit PIN {1}{3}{2} <0000> r 26
Repeater Mode {1}{3}{8}{1}: On {0}: <Off> r 27
Register H.set {1}{3}{0} ––27
Cancel Register {1}{3}{1} ––27
Display
(Change language)
{1}{1}{0} <English>–13
Feature Code Setting System
*1
Page
Play New Msg. {3}{2}{3} ––32
Play All Msg. {3}{2}{4} ––32
Erase All Msg. {3}{2}{5} – r 33
Start REC
(Record greeting)
{3}{0}{2} – r 31
Play Greeting {3}{0}{3} ––31
Default
(Reset to pre-recorded
greeting)
{3}{0}{4} – r 31
Number of Rings {2}{1}{1} <4 Rings> r 34
Recording Time {3}{0}{5} <3 Minutes> r 35
Remote Code {3}{0}{6} – r 33
Call Screening {3}{1}{0} <On>–30
Answer On {3}{2}{7} – r 30
Answer Off {3}{2}{8} – r 30
Feature Code Setting System
*1
Page
TG6561AL(e).book Page 23 Monday, July 26, 2010 4:05 PM