Panasonic KX-TG6841B

29
KX-TG6841B/KX-TG6842B/KX-TG6843B/KX-TG6844B/KX-TG6845B/KX-TG6873B/KX-TGA680B
8.1.2. Handset
Important:
Make sure the address on LCD is correct when entering new data. Otherwise, you may ruin the unit.
H/S key operation H/S LCD
1). Press { MENU } .
2). Select "Initial setting" using or
then press
{ SELECT } or {>} .
{^} {V}
3). Enter "7", "2", "6", "2", "7", "6", "6", "4".
Note: 7262 7664 = PANA SONI
(see letters printed on dial keys)
5). Enter "
٨ ", " ٨ ", " ٨ ", " ٨ " (Address). (*1)
7). Press
{ OK } , a long confirmation beep
will be heard.
8).
Press to return to standby mode.
After that, remove and reinsert the batteries. Press the Power button for
about 1 second if the power is not turned on.
6). Enter "
㧖 ", " 㧖 " (New Data). (*1)
4). Select "Write EEP" using or
then press
{ SELECT } or {>} .
{^} {V}
{OFF}
Default Data
New Data
^
V
Service Mode
Read EEP
Write EEP
Set Addr.:
_ _ _ _ _ _
Set Addr.:
Set Addr.:
Ringer setting
BACK
SELECT
CLEAR
OK
CLEAR
OK
BACK
Soft keys
Navigator key/
? (Volume) key
{OFF}
{FLASH}
{CALL WAIT}
Dial keypad
Phonebook
^
V
INT
SELECT
C
^
V
Initial setting
INT
SELECT
z
J
BACK
SELECT