Panasonic KX-TG7220FX - Battery Installation and Replacement

Preparation
9
Important:
L If you use a telephone line cord which
is not supplied, the unit may not work
properly.
Charger (KX-TG7202)
Note:
L Never install telephone wiring during a
lightning storm.
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
L The unit will not work during a power
failure. We recommend you connect a
standard telephone on the same line
for power protection.
Location
L For maximum distance and noise-free
operation, place your base unit:
– away from electrical appliances
such as TVs, radios, personal
computers, or other phones.
– in a convenient, high, and central
location.
Battery installation and
replacement
Important:
L Use only the supplied rechargeable
batteries noted on page 4, 5.
L USE ONLY rechargeable Ni-MH
batteries AAA (R03) size.
L Do NOT use Alkaline/Manganese/Ni-
Cd batteries.
L Ensure correct polarities (S, T)
when installing the batteries.
L Wipe the battery ends (S, T) with a
dry cloth.
L When installing the batteries, avoid
touching the battery ends (S, T) or
the unit contacts.
L When replacing batteries, we
recommend using the Panasonic
rechargeable batteries noted on page
4, 5.
1 Press the notch on the handset
cover firmly and slide it in the
direction of the arrow.
USE ONLY the supplied
AC adaptor (smaller).
(220–240 V, 50 Hz)
Hooks
B
C
C
TG7200-7220FX(e-e).book Page 9 Friday, June 29, 2007 10:24 AM