Panasonic KX-TG8421EB

35
KX-TG8421E/KX-TG8422E/KX-TG8423E/KX-TG8424E/KX-TGA840E
8.3. How to Clear User Setting
Units are reset to the Factory settings by this operation (Erase recorded Voice messages*, stored Phone numbers, Caller list
and etc.)
Note:
• Some menus are not reset. Refer to Operating Instructions (P.19).
• The reset menus differ depending on the following operations.
• This operation should not be performed for a usual repair.
* KX-TG8421/KX-TG8422/KX-TG8423/KX-TG8424 only
8.3.1. Resetting both base unit and handset
Both the base unit and the registered handset which you did the following steps to are reset. Other registered handsets
will not be reset.
Note:
(*1) Refer to Registering a Handset to a Base Unit (P.22).
8.3.2. Resetting only handset
The only handset is reset by doing the following steps to .
Note: (*2)
• The handset registration to the base unit is cancelled.
• If the handset needs to be registered to the base unit, refer to Registering a Handset to a Base Unit (P.22).
• If users do not bring the base unit with them, the registration procedure has to be done by users themselves.