21
KX-TGC220/KX-TGC222/KX-TGC223/KX-TGCA20
Frequently Used Items (Base Unit)
ex.)
Note:
(*1) When you enter the address or New Data, please refer to the table below.
(*2)
Items Address Default Data New Data Remarks
C-ID (FSK) sensitivity 08 6A/08 69 00/28 00/1C
(3 dB up)
0 0/ 1 4
(6 dB up)
When hex changes from “00/28” to “00/1C” or
“00/14”, gain increases by 3 dB or 6 dB.
C-ID (DTMF) sensitivity 08 86/08 85 08/00 0B/4C
(3 dB up)
0F/F6
(6 dB up)
When hex changes from “00/01” to “0B/4C” or
“0F/F6”, gain increases by 3 dB or 6 dB.
Frequency 00 08 / 00 07 01/00 - - Use these items in a READ-ONLY mode to
confirm the contents. Careless rewriting may
cause serious damage to the computer system.
ID 00 02 ~ 00 06 Given value - -
Bell length 03 C6 32 (5 sec) (*2) 1E (3 sec) 14 (2 sec) This is time until bell stops ringing.
(Unit: 100 msec)
Desired Number (hex) Input Keys Desired Number (hex) Input Keys
0 0 A [Flash] + 0
1 1 B [Flash] + 1
. . C [Flash] + 2
. . D [Flash] + 3
. . E [Flash] + 4
9 9 F [Flash] + 5
Bell length 32 (hex) = 50 (dec) 50 100 msec = 5000 msec (5 sec)
To Next Page
Loading...
