Panasonic KX-TGK220E - Getting Started: Setup and Initial Configuration; Base Unit Connections Procedure; Handset Battery and Cover Installation

Setting up
Connections
n Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit, then to the telephone line jack until
you hear a click.
Fasten the cord by hooking it.
A DSL/ADSL filter (not supplied) is
required if you have a DSL/ADSL service.
Note:
R Use only the supplied Panasonic AC
adaptor PNLV226E.
R Use only the supplied telephone line cord.
1
53
4
2
3
Battery installation/setting the
handset cover
R USE ONLY rechargeable Ni-MH batteries
AAA (R03) size (
1
).
R Do NOT use alkaline/manganese/Ni-Cd
batteries.
R Confirm correct polarities (
, ).
1
4
2
3
1
R Follow the directions on the display to set
up the unit.
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
7
Getting Started