4.3 KX-TA824 PBX Programming for APT Integration
The instructions in this section are for programming a KX-TA824 via the Operating and Maintenance Tool. To
program a KX-TA824 using the Manager Extension, follow the instructions for KX-TA series PBX programming
by referring to 4.6 KX-TA Series PBX Programming for APT Integration.
Note
• Software version 3.0 or higher is required for 4-port APT Integration. Consult your dealer for more
information.
1. Go to the 1.System - 1.Date & Time screen. Set the date and time. Click Apply to save the changed data.
2. Go to the 1.System - 2.Main screen.
Under Voice Mail, select APT Integration, then select each extension jack that is connected to the VPS.
Click Apply to save the changed data.
When Jack 7 & 8 is selected, extension jack numbers 07 and 08 will be in extension group 7 automatically.
Likewise, when Jack 15 & 16 is selected, extension jack numbers 15 and 16 will be in extension group 8
Document Version 3.0 2010/06 Installation Manual 107
4.3 KX-TA824 PBX Programming for APT Integration
To Next Page
Loading...
