Transfer to Outside Parameters
These parameters specify how the VPS will transfer calls to trunks (CO lines) from the following services:
Custom Service, Call Transfer Service, and Personal Custom Service.
Outside Transfer Sequence
• Call Transfer to Outside Sequence
Specifies the sequence the VPS uses to transfer calls to trunks (CO lines).
• Call Transfer to Outside Reconnect Sequence on Busy
Specifies the sequence the VPS uses to reconnect the line when the transferred party is busy.
• Call Transfer to Outside Reconnect Sequence on No Answer
Specifies the sequence the VPS uses to reconnect the line when the transferred party does not answer.
• EFA Transfer Sequence
Specifies the sequence the VPS uses to transfer calls to trunks (CO lines) using EFA (External Feature
Access).
• EFA Transfer Reconnect Sequence on Busy
Specifies the sequence the VPS uses to reconnect the line when the party transferred with EFA (External
Feature Access) is busy.
• EFA Transfer Reconnect Sequence on No Answer
Specifies the sequence the VPS uses to reconnect the line when the party transferred with EFA (External
Feature Access) does not answer.
• Call Transfer to Outside Answer Mode
Specifies the answering method the VPS uses to recognize whether the destination party has answered
the transferred trunk (CO line) call.
• Ignore Received First DTMF
If the PBX sends a DTMF signal to the VPS when the VPS attempts to transfer a call to an outside
telephone, set this parameter to "Enable".
Document Version 3.0 2010/06 Installation Manual 133
5.2.3 PBX Parameters
To Next Page
Loading...
