7.2.2 Button Assignment via PC Programming
KX-TA824 users can assign buttons via PC programming. Follow the procedure below to assign each button.
1. Go to the 2.Extension - 4.Flexible Buttons screen.
2. Select the desired CO button.
1. Select LCS from the menu.
2. Click OK to save the button.
3. Select the desired CO button.
1. Select LCS Cancel from the menu.
2. Click OK to save the button.
4. Select the desired CO button.
1. Select 2-way Record from the menu.
2. Enter the extension number of the VPS.
3. Click OK to save the button.
5. Select the desired CO button.
1. Select 2-way Transfer from the menu.
2. Enter the extension number of the VPS.
3. Click OK to save the button.
4. Select the desired CO button.
a. Select Voice Mail Transfer from the menu.
b. Enter the extension number of the VPS.
c. Click OK to save the button.
186 Installation Manual Document Version 3.0 2010/06
7.2.2 Button Assignment via PC Programming
To Next Page
Loading...
