If Auto Configuration is started
Auto Configuration (available for APT/DPT Integration only) allows the PBX and VPS to exchange information
and make the setup process easier. If you cannot use Auto Configuration or skip Auto Configuration, continue
from "If Auto Configuration is skipped" later in this section.
If you start Auto Configuration, the following screen will be displayed while data is exchanged between the
PBX and VPS.
Click Next when the button becomes available.
Create mailboxes
The next window displayed is the Select Extensions window. Extension data retrieved from the PBX is
displayed.
Select the extensions for which you would like to create mailboxes, then click Next.
168 Installation Manual Document Version 3.0 2010/06
6.1.2 Quick Setup
To Next Page
Loading...
