Panasonic KX-TVA50 - Class of Service

2.15.2 Wall Mounting the AC Adaptor
Mounting on Wooden Wall
1. Place the AC adaptor wall mounting template (found later in this section) on the wall to mark the locations
where the 2 screws need to be placed.
KX-TVA50 KX-TVA200
83 mm
(3-1/4 in.)
110 mm
(4-5/16 in.)
2. Install the screws and washers (included) in the wall.
Washer
Drive the screw
to this position.
Note
• Drive the screws into the wall until each screw head is the same distance from the wall.
• Install the screws perpendicular to the wall.
3. Mount the AC adaptor as shown.
Document Version 3.0 2010/06 Installation Manual 79
2.15.2 Wall Mounting the AC Adaptor