4.7 Completing the PBX-VPS Connection
Once you have finished installing all optional cards, connecting all telephones to the PBX, and configuring the
PBX for APT/DPT Integration, proceed with the following steps to complete and test the PBX-VPS connection.
1. Start KX-TVA Maintenance Console (see 3.2 KX-TVA Maintenance Console Installation).
2. Using KX-TVA Maintenance Console, initialize the PBX (see 8.1 Initializing the VPS).
3. Start the Quick Setup utility and proceed with Quick Setup (see 6.1.2 Quick Setup).
4. Select Utility in the menu bar.
5. Select Port Status.
6. Make sure each line connecting the PBX and VPS is displayed as Ready.
Document Version 3.0 2010/06 Installation Manual 123
4.7 Completing the PBX-VPS Connection
To Next Page
Loading...
