2.5 System Parameters
Programming Manual 109
Value Range
Selection from all installed languages (KX-TVM50: 3 languages, KX-TVM200/KX-NCV200: 10
languages)
Feature Manual References
2.2.44 System Prompts
DTMF
Specifies a selection number.
Value Range
1–9/None
Selection Menu Wait Time
Specifies the length of time that the VPS waits for the caller to select a language by pressing the
appropriate dial key. If this time period expires without the selection number being entered, the VPS
uses the Primary Language.
Value Range
0 s–20 s
Feature Manual References
2.2.44 System Prompts
Selection Menu Repeat Cycle
Specifies the number of times the VPS will play the Multilingual Selection Menu.
Value Range
1–3 times
Feature Manual References
2.2.33 Multilingual Service
Delay Time After Connected Received for Incoming
Specifies the length of time (in seconds) that the VPS waits after the line is connected for incoming
calls before playing the prompt.
Value Range
0 s–10 s
Feature Manual References
2.2.44 System Prompts
To Next Page
Loading...
