Panasonic KX-TVM50 - Auto Forwarding

2.1 Mailbox Settings
50 Programming Manual
2.1.6 Auto Forwarding
Moves or copies unplayed messages from one mailbox to another, after a specified period of time.
This service is only available to subscribers (you cannot auto forward messages to a Mailbox Group).
Active
If set to "Yes", the VPS automatically forwards messages that have not been played for a specified
length of time to another mailbox.
Value Range
No, Yes
Feature Manual References
2.2.2 Auto Forwarding
Mailbox Number
Specifies the mailbox to which the messages will be forwarded.
Note
• A Mailbox Group number cannot be specified as a destination.
Value Range
2–5 digits
Feature Manual References
2.2.2 Auto Forwarding
Delay Time
Specifies the length of time in hours and minutes that the VPS waits before forwarding unplayed
messages. The maximum delay time is 99 h, 59 min.
Note
• The delay time must be shorter than the New Message Retention Time, or else messages
will be deleted before being forwarded.
Value Range
00:05–99:59
Feature Manual References
2.2.2 Auto Forwarding
Forwarding Mode
Specifies if forwarded messages are to be retained in the original mailbox. When set to "Copy", copies
of the messages are retained in the original mailbox after forwarding. When set to "Move", messages
are forwarded to the receiving mailbox and are not retained in the original mailbox.