1.8 Utility
Programming Manual 29
a) Real Time Trace: monitors the trace data of the selected port. Also, it is possible to log the
monitoring data as a file.
b) Internal Trace: logs the trace data of the selected port automatically in the system.
Follow the steps below to monitor or log the system trace data.
1. Click Utility in the menu bar.
2. Select System Trace.
(You can click the icon in the tool bar instead of step 1 and 2.)
Real Time Trace
1. Select Real Time Trace.
2. Check Enable/Disable Trace Data.
3. Check the data and port you wish to monitor.
4. Click …, navigate the folder to save the monitored data as a file.
5. Click Apply.
Note
• During the "Real Time Trace", following features cannot be used:
– Other features in the Utility menu
– Recording features on a PC connected to the VPS (for Mailbox Group, Extension
Group, System Caller Name, and Custom Service)
Internal Trace
1. Select Internal Trace.
2. Select Setting, Display, or Trace Clear.
– Setting: Disables or enables the Internal Trace feature, and specifies the data and port
you wish to log.
– Display: Displays the trace data.
– Trace Clear: Clears saved trace data.
1.8.6 Utility—System Maintenance
The System Administrator can maintain the VPS using System Maintenance.
Follow the steps below for System Maintenance:
1. Click Utility in the menu bar.
2. Select System Maintenance.
3. Edit parameters in the System Maintenance dialogue box.
4. Click OK.
System Maintenance Mode
Specifies whether to enable or disable System Maintenance Mode.
Value Range
Disable, Enable
To Next Page
Loading...
