1.4 Connect
18 Programming Manual
To connect using a modem
1. From the Connect menu, select Dial-up (Modem).
2. Enter the administrator password and the settings as required.
3. Click Next, and Finish when the connection is completed.
1.4.4 Connect—Disconnect
Closes the connection between KX-TVM/NCV Maintenance Console and the VPS.
To disconnect
1. From the Connect menu, select Disconnect.
2. Click Yes.
Password – Enter the password used to log on to KX-
TVM/NCV Maintenance Console.
Setting Values Description
To Next Page
Loading...
