Panasonic KX-TVM50 - Page 135

2.5 System Parameters
Programming Manual 135
Value Range
0–24
Feature Manual References
2.3.36 VM Menu (DPT Integration Only)
E-mail Integration
E-mail Integration allows the VPS to send new message notification or to send recorded voice
messages as file attachments to subscribers via e-mail.
Note
When sending e-mails, the sent date is stamped to e-mails at the SMTP server connected to the
VPS, otherwise, depending on the setting of the e-mail application the receiver uses.
E-mail Integration
If set to "Enable", subscribers are able to utilise E-mail Integration features.
Value Range
Disable, Enable
Feature Manual References
2.2.20 E-mail Integration
Mail Address
Specifies the mail address of VPS. We recommend entering an administrator's e-mail address here.
If there are any errors when the VPS tries to send e-mail messages, error messages will be sent to
this address.
Value Range
Max. 128 characters
Feature Manual References
2.2.20 E-mail Integration
Full Name
Specifies the full name that will appear in e-mail messages sent from the VPS.
Value Range
Max. 64 characters
Feature Manual References
2.2.20 E-mail Integration
SMTP Server Address
Enter the IP address of the outgoing e-mail server used by the VPS.