Panasonic KX-TVM50 - Page 85

2.4 Service Settings
Programming Manual 85
Redial Cancel Timing
Specifies the interval between the voice guidance messages that ask if continuous redials are to be
attempted during call holding.
Example: "To continue holding, press 1. Otherwise, press 2."
Value Range
15 s, 30 s, 45 s, 60 s
Feature Manual References
2.2.23 Hold
Hold Recall Mode
Specifies how the VPS handles a call when the call transfer sequence is Call Transfer without
Announcement and the transferred call is not answered.
Value Range
Return to Top Menu, Message Recording
Feature Manual References
2.2.23 Hold
Alternate Extension
Specifies an extension, which requires a different transfer sequence than normal. Calls to these
extensions will be transferred according with the setting in "Alternate Extension Transfer Sequence"
in 2.5.4 Parameters. Follow the steps below to edit Alternate Extension:
1. Click Click to edit….
[Addition]
1. Click the icon [New].
2. Enter an extension number.
3. Click OK.
[Edit]
1. Select the desired alternate extension.
2. Click the icon [Edit].
3. Edit the extension number.
4. Click OK.
[Deletion]
1. Select the desired alternate extension.
2. Click the icon [Delete].
3. Click Yes.
Note
• The Extension Group List or Logical Extension Numbers cannot be assigned.