Panasonic KX-UT113

see "Flexible Buttons (KX-UT133/KX-UT136/
KX-UT248 only) (Page 39
)".
Receiving Calls
This
section explains the basic methods for receiving a
call.
Receiving a Call
1. Go off-hook.
2. To end the call, go on-hook.
Auto answer
You can have the unit automatically answer an
incoming call. The call is connected after a programmed
number of rings.
• To enable Auto Answer:
In stand-by mode, press [AUTO ANSWER/
]
until
"Auto Answer On" appears.
• To disable Auto Answer:
In stand-by mode, press [AUTO ANSWER/
] until
"Auto Answer Off" appears.
Note
• When Auto Answer is enabled,
AUTO ANS
appears on the display in stand-by mode.
Rejecting Calls
You can reject an incoming call at your unit or set the
unit to reject certain calls.
Rejecting a call while receiving
1. When receiving an incoming call, press
Reject
.
Rejecting anonymous calls
You can set the unit to reject calls when the unit
receives a call without phone number.
To reject anonymous calls, the Block Anonymous Call
setting must be enabled through Web user interface
programming (Page
63). For details, consult your
administrator or dealer.
Note
• Rejected phone numbers will not be stored in
the incoming or missed call log.
• Depending on the line an incoming call is
arriving on, the call may not be rejected.
Document Version 2013-03 Operating Instructions 31
Feature Operations