4.4.4.1 Web Server Settings
Web Server Port
Description Specifies the port number used by the Web server.
Value Range 80, 1024–49151
Note
• You cannot specify here the same port number as any of the
port numbers specified for the individual lines in [Source
Port] in 4.5.2.5 SIP Source Port.
Default Value 80
Note
• When you change the default value of the port number to a
value other than "80", such as "8080", enter the URL for
accessing the Web user interface using the following format:
"http://192.168.0.100:8080/"
(192.168.0.100
: IP address of the unit)
Port Close Timer
Description Specifies the length of time, in minutes, to keep the Web port open when
there has been no communication between the unit and the PC. If the
specified length of time elapses without any communication, the Web
port closes
automatically. Communication is detected when you click a
tab, menu item, the [Save] button, or by reloading the application or
pressing the F5 key.
Value Range 1–1440
Default Value 30
Document Version 2013-03 Administrator Guide 99
4.4.4 Web Server Settings
To Next Page
Loading...
