To Next PageTo Next Page
Why can't the other party hear my voice on my Panasonic KX-UT136?
This could be because the unit is muted. To resolve this, press [MUTE/ ] to turn off the mute feature. Also, if you are using the speakerphone, ensure that objects are not obstructing the microphone. Keep hands and objects away from the unit during calls.
What to do if my Panasonic IP Phone display is blank?
If the display is blank, it means the unit is not receiving power. Make sure the device supplying PoE is receiving power and the Ethernet cable is properly connected. If using an AC adapter, check that it is connected and also receiving power.
What to do if my Panasonic KX-UT136 does not ring when a call is received?
If the unit doesn't ring, the ringer may be turned off. Press [ ] while a call is being received, or change the ringer volume setting.
How to reset the administrator password on a Panasonic IP Phone?
To reset the login password for the Administrator or User account on your Panasonic IP Phone's Web user interface, reset the password directly from the unit. Note that this will reset the passwords for both Administrator and User accounts. For security, it's recommended to set new passwords immediately afterward.
How to correct the time on my Panasonic KX-UT136 IP Phone?
To correct the time on your Panasonic IP Phone, access the Web user interface to set NTP synchronization and DST (Summer Time) control. This allows the phone to adjust the time automatically. Also, check the firewall and port forwarding settings on the router.
What to do if I lost the login password of the Web user interface for the Administrator or User account on my Panasonic KX-UT136 IP Phone?
If you have lost the login password for the Administrator or User account on your Panasonic IP Phone's Web user interface, reset the password from the unit. For security reasons, it is recommended that the passwords are set again immediately.
Why is the time not correct on my Panasonic KX-UT136 IP Phone?
If the time is incorrect on your Panasonic IP Phone, you can set NTP synchronization and DST (Summer Time) control in the Web user interface to adjust the time automatically. If the time is still incorrect after setting NTP synchronization, check the firewall and port forwarding settings on the router.
What to do if Panasonic Telephone unit is not performing properly?
If your Panasonic Telephone unit isn't working as expected, there are a few things you can check. First, make sure all cables and cords are properly connected. If connections are correct, verify your connection settings with your administrator. Finally, if an error occurred, try restarting the unit.
Why is displayed on the screen of my Panasonic Telephone?
If is displayed on the screen of your Panasonic Telephone, registration to the SIP server has been lost. Consult your administrator or dealer.
What to do if I cannot cancel the display lock on Panasonic Telephone?
If you cannot cancel the display lock on your Panasonic Telephone, it may be due to an incorrect PIN. Consult your administrator or dealer.
General| Ethernet Ports | 2 |
|---|---|
| Power over Ethernet | Yes |
| Lines | 6 |
| SIP Accounts | 6 |
| Speakerphone | Yes |
| Headset Port | 2.5 mm |
| Operating Temperature | 0 °C to 40 °C |
| Humidity | 10% to 90% (non-condensing) |
| Audio Codec | G.711, G.722, G.726, G.729a |
| Network Interface | 10/100 Mbps Ethernet |
| Protocols | SIP |
Safety guidelines to reduce risk of injury, electric shock, fire, and damage.
Troubleshooting steps for unit malfunction and recommendations for preventing data loss.
Precautions for power connections, placement, and wall mounting.
Measures for network security and important safety instructions.
Diagrams and numbering of controls for KX-UT113X/KX-UT123X and KX-UT113NE/KX-UT123NE models.
Diagrams and numbering of controls for KX-UT133X and KX-UT113RU/KX-UT123RU models.
Diagrams and numbering of controls for KX-UT133NE and KX-UT133RU models.
Diagrams and numbering of controls for KX-UT136X and KX-UT136NE models.
Diagrams and numbering of controls for KX-UT136RU and KX-UT248X models.
Diagrams, numbering of controls, and LCD details for KX-UT248NE/RU models.
Explanation of soft buttons (S1-S4) and their indicator lamps.
Description of Navigator, ENTER, Handset Hook, and function buttons.
Explains soft button icons, scroll indicator, and flexible button display.
Table of icons like FWD/DND, AUTO ANS, ECO, etc., and their meanings.
Explains accessing functions via soft buttons and lists icons with their descriptions.
Table listing more icons and their descriptions (Answer, End, Reject, etc.).
Methods for picking up/hanging up the handset and enabling hands-free conversations.
How to adjust ringer, handset, headset, and speaker volume.
Basic methods for initiating calls and using the phonebook.
Basic methods for handling incoming calls and call rejection.
Methods for calling from logs, redialing last number, and one-touch operations.
Configuring call forwarding and Do Not Disturb settings.
How to transfer calls to another party, including one-touch.
Making, removing parties from, and ending conference calls.
Explains DN, BLF, ACD, Wrap Up, One-Touch, and Headset buttons.
Overview of configurable settings like Ringer, Network, FWD/DND.
Viewing unit information and configuring network parameters.
How to use the Web-based interface for configuring settings and features.
Steps before and during wall mounting the unit.
Solutions for general unit problems.
Lists error messages and their possible causes and solutions.
Solutions for making/receiving calls and sound quality problems.
