100
DVQP1223
Focus, Brightness (Exposure) and Color tone Settings
Taking pictures with Exposure Compensation
Recording mode:
Corrects the exposure when there is a backlight or when the subject is too dark or too
bright.
1
Press the rear dial to switch to Exposure
Compensation operation
2
Rotate the rear dial to compensate the
exposure
Exposure Bracket
Exposure Compensation
Operation Description
Compensates the exposure
Sets the exposure bracket (→128)
OFF
Under-exposed
Optimum
exposure
Over-exposed
Adjust the
exposure to the [+]
direction
Adjust the
exposure to the [-]
direction
3
Press the rear dial to set
• You can also press the shutter button halfway to set.
●
You can set the exposure compensation value in the range between –5 EV and +5 EV.
Settings can be made within a range of –3 EV to +3 EV while recording motion pictures, recording
4K photos, or recording in [Post Focus].
●
When [Auto Exposure Comp.] of [Flash] in the [Rec] menu is set to [ON], the flash output is also
automatically adjusted based on the exposure compensation value. (→147)
●
Depending on the brightness, this may not be possible in some cases.
●
The set Exposure Compensation value is stored even if the camera is turned off. (When [Exposure
Comp. Reset] (→207) is set to [OFF])
To Next Page
Loading...
