244
DVQP1223
Wi-Fi
Sending pictures
●
Since the camera gives priority to recording, sending may take longer during the recording.
●
If you turn off the camera before you have completed sending, or if you close the Wi-Fi
connection, or in similar situations, unsent files will not be resent.
●
You may not be able to delete files or use the [Playback] menu while sending.
●
Motion pictures, 4K burst files recorded with the 4K Photo function, and pictures recorded in [Post
Focus] cannot be sent.
●
If you set [Time Lapse Shot], the Wi-Fi connection is terminated and you cannot use this function.
[Send Images Stored in the Camera]
You can select and send recorded images.
■
How to select an image(s) after selecting [Single Select] or [Multi Select]
[Single Select]
Select the picture
SetSet
Select [Set]
[Multi Select]
Select the picture (repeat)
• If selected again, the setting will be canceled.
2 3
4 5 6
1
OK
Select [OK]
• The number of pictures that can be sent by [Multi Select] is
limited.
• To change the send settings on a screen that is displayed after the image has been
sent, press [DISP.] button. To close the connection, select [Exit].
●
Details of the [Playback] menu [Favorite] or [Print Set] settings will not be sent.
●
Some images taken with a different camera may not be able to be sent.
●
Images that have been modified or edited with a computer may not be able to be sent.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
