218
DVQP1223
Using Menu Functions
Menu list
[Clear Retouch]
You can erase unnecessary parts recorded on the pictures taken.
• The erasure operation can only be
performed by touching. [Clear Retouch]
automatically enables the touch
operation.
→ [Playback] → [Clear Retouch]
1
Use to select a still picture and press [MENU/SET]
SetSet
UndoUndo
SCALINGSCALING
REMOVEREMOVE
2
Drag your finger over the part you want to erase
• The parts to be erased are colored.
• Touching [Undo] will return the colored part back to its previous
state.
Erasing details (enlarging the display)
SetSet
Undo
Undo
SCALINGSCALING
REMOVE
REMOVE
Touch [SCALING]
• On the touch screen, pinch out your two fingers to zoom in, and
pinch in your two fingers to zoom out (→40).
• Dragging the screen allows you to move the enlarged part.
Touch [REMOVE]
• This will bring you back to the operation of dragging your finger
over the part you want to erase. The part you want to erase can
be dragged even while the picture is enlarged.
3
Touch [Set]
4
Touch [Save] or press [MENU/SET]
●
Pictures may appear unnatural because the background of deleted parts is artificially created.
●
For group pictures, perform [Clear Retouch] on each picture. (They cannot be edited at once.)
●
When [Clear Retouch] is performed on group pictures, they are saved as new pictures separate
from the original ones.
●
Not available when the viewfinder is in use.
●
This function is not available in the following cases:
• Panorama pictures
• Motion pictures
• 4K burst files
• Pictures recorded using [Post Focus]
• Still pictures recorded with the [Quality] setting [
]
To Next Page
Loading...
Need help?
General
Weight and Dimensions
