95
DVQP1223
Focus, Brightness (Exposure) and Color tone Settings
Taking pictures with Auto Focus
Optimizing the focus and brightness for a touched position
Recording mode:
You can optimize the focus and brightness for the position you have touched.
→ [Custom] → [Touch Settings] → [Touch AF] → [AF+AE]
1
Touch the subject you want to optimize the brightness
for
• The AF area setting screen appears. (→91)
• The brightness optimization position is displayed on the center of
the AF area. The position follows the movement of the AF area.
• [Metering Mode] is set to [
], which is used exclusively for the
[Touch AE].
• Touching [Reset] returns the brightness optimization position and
the AF area to the center.
SetSet
ResetReset
2
Touch [Set]
• The AF area with the same function as [ ] is displayed on the touched position.
• If you touch [
] (touch [ ] when [ ] is set), the setting of [AF+AE] is canceled.
When the background has become too bright, etc., the
brightness contrast with the background can be adjusted by
compensating the exposure.
●
When recording with the Touch Shutter, the focus and brightness are optimized for the touched
position before recording takes place.
●
At the edge of the screen, the metering may be affected by the brightness around the touched
location.
●
The [AF+AE] does not function in the following cases:
• When using the Digital Zoom
• When [4K Live Cropping] is set
To Next Page
Loading...
