205
DVQP1223
Using Menu Functions
Menu list
[Monitor Priority (Play)]
Pictures are automatically played back on the monitor after the camera is switched from
recording mode to playback mode by pressing [ ] (Playback) button.
[ON] Pictures are played back on the monitor.
[OFF]
Pictures are played back on the viewfinder or the monitor depending on which one was
used to play back pictures previously.
[Economy]
■
[Sleep Mode]
The camera is automatically turned off if the camera has not been used for the time
selected on the setting.
• To restore → Press the shutter button halfway, or turn the camera [ON/OFF] switch to
[OFF] and then turn it [ON] again
■
[Sleep Mode(Wi-Fi)]
The camera is automatically turned off if the camera has not been used for approx.
15 minutes with no Wi-Fi connection.
• To restore → Press the shutter button halfway, or turn the camera [ON/OFF] switch to
[OFF] and then turn it [ON] again.
■
[Auto LVF/Monitor Off]
The monitor/viewfinder is automatically turned off if the camera has not been used for the
time selected on the setting.
• To restore → Press any button or touch the monitor.
●
This function is not available in the following cases:
• During motion picture recording/playback
• When recording with [
] ([4K Pre-Burst]) of the 4K Photo function
• When [Multi Exp.] is set
• When connected to computer/printer
• During Slide Shows
• When using [Time Lapse Shot]
• When [Auto Shooting] of [Stop Motion Animation] is set to [ON]
●
When using the AC adaptor (optional) and DC coupler (optional), [Sleep Mode] or [Sleep
Mode(Wi-Fi)] is disabled.
●
When using the AC adaptor (optional) and DC coupler (optional), [Auto LVF/Monitor Off] is fixed to
[5 MIN.].
→ [Setup]