121
DVQP1223
4K Photo and Drive Settings
Adjusting the focus after recording ([Post Focus]/[Focus Stacking])
3
(When selecting [Range Merging])
Touch the focus point
• Select positions at two or more points.
• Focus points between the selected two positions will be
selected.
• Positions that cannot be selected, or that would produce an
unnatural result will be grayed out.
• Touch a position again to deselect it.
• If you drag the screen you can then continue to select positions.
Operation Touch operation Description
Touch Select the position
[Fn2] [Set/Cancel] Set/Clear the position
[DISP.]
[All]
Select all positions (Before
selecting position)
[Reset]
Deselect All (After selecting
position)
[MENU/SET]
Combine and save picture
ResetReset
Set/CancelSet/Cancel
ResetReset
Set/CancelSet/Cancel
4
Touch [ ] to combine and save the picture
• The picture will be saved in JPEG format with recording information (Exif information) from the
nearest position’s picture, including its shutter speed, aperture and ISO sensitivity information.
To Next Page
Loading...
