150
DVQP1223
Stabilizer, Zoom and Flash
Taking Pictures with Wireless Flashes
[Built-in
Flash] /
[External
Flash]
[Firing Mode]
[TTL]: The flash output is automatically adjusted.
[AUTO]
*
: Sets the flash output using an external flash.
[MANUAL]: Manually sets the flash ratio of an external flash.
[OFF]: The flash of this unit fires only for a communication
light emission.
[Flash Adjust.]
Adjusts the flash output of the flash of this unit manually when
[Firing Mode] is set to [TTL].
[Manual Flash
Adjust.]
Sets the flash ratio of an external flash when [Firing Mode] is
set to [MANUAL].
• You can set the flash ratio from [1/1] (flash firing full power)
to [1/128] in 1/3 steps.
[A Group]/
[B Group]/
[C Group]
[Firing Mode]
[TTL]: The flash output is automatically adjusted.
[AUTO]: The wireless flash automatically sets the flash
output.
[MANUAL]: Manually sets the flash ratio of the wireless flash.
[OFF]: The wireless flashes of the set group do not fire.
[Flash Adjust.]
Adjusts the flash output of the wireless flash manually when
[Firing Mode] is set to [TTL].
[Manual Flash
Adjust.]
Sets the flash ratio of the wireless flash when [Firing Mode] is
set to [MANUAL].
• You can set the flash ratio from [1/1] (flash firing full power)
to [1/128] in 1/3 steps.
*
This option is not available when the flash (DMW-FL200L: optional) is attached to the camera.
■
Setting the communication light emission to be used when wireless flash
recording is performed
→ [Rec] → [Flash] → [Communication Light]
Settings: [HIGH] / [STANDARD] / [LOW]
To Next Page
Loading...
