Preparation/Basic
17
(ENG) DVQX1572
Quick Start Guide
• Check that the camera is turned off.
When the camera is not in use, attach the lens cap to protect the lens.
• We recommend attaching the lens cap to the camera using the lens cap string to
prevent loss of the lens cap.
• Attach the shoulder strap when using the camera to prevent it from dropping.
1 Use the lens cap string (supplied) to attach the lens cap to the camera.
A: Make sure that the thicker portion of the string is not hanging over the lens
cap or the shoulder strap eyelet.
2 Attach the lens cap.
B: To attach and remove the lens cap, press the
areas shown by arrows in the illustration.
3 Attach the shoulder strap.
C: Shoulder strap eyelet
• In addition, attach the other side of the shoulder strap in the same manner.
• Keep the lens cap string out of reach of children to prevent swallowing.
¥ Use the shoulder strap around your shoulder.
–Do not wrap the strap around your neck.
It may result in injury or accident.
Attaching the Lens Cap/Shoulder Strap
DC-LX100M2PPP-DVQX1572_eng.book 17 ページ ２０１８年８月７日 火曜日 午後５時１０分
To Next Page
Loading...
Need help?
General
