Wi-Fi/Bluetooth
59
(ENG) DVQX1572
Connecting to a smartphone
•OS
¥ Use the latest version.
¥ Supported OSs are current as of September 2018 and are subject to change.
¥ The service may not be able to be used properly depending on the type of smartphone
being used.
Refer to the support site below for details about the “Image App”.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
¥ When downloading the app on a mobile network, high packet communication fees may
be incurred depending on the details of your contract.
¥ Read the [Help] in the “Image App” menu for further details on how to operate.
¥ When you operate the “Image App” on the smartphone that is connected to the
camera via Wi-Fi, [Help] in the “Image App” may not be displayed depending on the
smartphone. In this case, after terminating the connection to the camera, reconnect
the smartphone to a mobile phone network such as the 3G or LTE network or to a
Wi-Fi router, and then display [Help] in the “Image App”.
¥ Some of the screens and information provided in this owner's manual may differ from
your device depending on the supported OS and “Image App” version.
Installing the smartphone/tablet app “Panasonic Image
App”
App for Android
TM
:
Android 4.4 or higher
(Android 5.0 or higher is required to use the Bluetooth
function.)
App for iOS:
iOS 9.0 or higher
(The Bluetooth function cannot be used with the iPad 2.)
1 Connect the smartphone to a network.
2 (Android) Select “Google Play
TM
Store”.
(iOS) Select “App Store”.
3 Enter “Panasonic Image App” or “LUMIX” into the search box.
4 Select “Panasonic Image App” and install it.
DC-LX100M2PPP-DVQX1572_eng.book 59 ページ 2018年8月7日 火曜日 午後5時10分