38
DVQX1572 (ENG)
Recording
Recording 4K Photos
Applicable modes:
The camera allows you to take burst pictures of 8 million pixels (approx.) at
30 frames/second. After taking these pictures, you can save the desired moment
extracted from their burst file.
• Use a UHS Speed Class 3 card.
1
Press [ ] (4).
2
Press 2/1 to select a 4K photo icon ([ ], etc,), and then
press 3.
• By default, you can also perform the same operations as steps 1 and 2 by
pressing [Fn1].
3
Select the recording method with 2/1, and then press
[MENU/SET].
• You can also set the recording method in [4K PHOTO] in the [Rec] menu.
[4K Burst]
For capturing the best shot of a fast-moving subject
Burst recording is performed
while the shutter button is
pressed and held.
A Press and hold
B Recording is performed
[4K Burst(S/S)]
“S/S” is an
abbreviation of
Start/Stop.
For capturing unpredictable photo opportunities
Burst recording starts when
the shutter button is pressed
and stops when pressed
again.
C Start (First)
D Stop (Second)
E Recording is performed
Adding markers to
select and save pictures
You can add markers if you press [Fn2] during recording.
(Up to 40 markers per recording) When selecting and saving
pictures from a 4K burst file, you can skip to the positions where
you added markers.
DC-LX100M2PPP-DVQX1572_eng.book 38 ページ ２０１８年８月７日 火曜日 午後５時１０分
To Next Page
Loading...
