64
DVQX1572 (ENG)
Wi-Fi/Bluetooth
Controlling with a Smartphone
∫ Required wireless connectivity mode
The wireless connectivity mode required varies depending on the function to be
used after connecting to a smartphone.
This function allows you to turn on the camera from a distant location and take
pictures or view images on the camera even when it is in your bag.
1 Make a Bluetooth connection to the smartphone. (P60)
2 Select the camera’s menu.
3 Set the camera ON/OFF switch to [OFF].
4 On the smartphone, start up the “Image App”, and set the Bluetooth
function to a state in which a connection can be made (standby state).
5 Operate the smartphone.
• The camera automatically turns on, allowing it to make a Wi-Fi connection
automatically.
– (iOS devices) Depending on the connection status of the smartphone, you may
need to change the connected device on the Wi-Fi setup screen. Follow the on-
screen message on the smartphone to change the setting.
Wireless
connectivity
required
Support for Bluetooth low energy
Indicates that the function can be used with smartphones that
support Bluetooth low energy.
Indicates that the function can be used with smartphones that
do not support Bluetooth low energy.
Indicates that the function can be used with smartphones that
support Bluetooth low energy.
• Indicates that the function requires you to connect to a
smartphone using both Bluetooth and Wi-Fi.
Turning on/off the camera with a smartphone
Wireless connectivity required:
> [Setup] > [Bluetooth] > [Remote Wakeup] > [ON]
1 Select [ ].
2 Select [Remote operation].
Bluetooth
Wi-FiBluetooth
DC-LX100M2PPP-DVQX1572_eng.book 64 ページ ２０１８年８月７日 火曜日 午後５時１０分
To Next Page
Loading...
Need help?
General
