Preparation/Basic
25
(ENG) DVQX1572
1 Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
C Focus indication
• Aperture value and shutter speed are displayed.
(It will turn red and blink if the exposure is not
correct.)
• Once the subject is in focus, the focus indication is
displayed. (When the subject is not in focus, the
indication flashes.)
2 Press the shutter button fully (push it in
further), and take the picture.
¥
Pictures cannot be taken until focus is achieved when [Focus/Release Priority]
in the [Custom] ([Focus / Release Shutter]) menu is set to [FOCUS].
¥ Press [(] to display the recorded image. (P51)
∫ Focus range
Focus range is displayed when operating the
zoom.
The focus range may change gradually
depending on the zoom position.
D Recordable range indication
Taking pictures
DC-LX100M2PPP-DVQX1572_eng.book 25 ページ ２０１８年８月７日 火曜日 午後５時１０分
To Next Page
Loading...
