56
DVQX1572 (ENG)
Menu
Select multiple frames from a 4K burst file to create a sequence composition of a
moving subject into one picture.
1 Press 2/1 to select the 4K burst files and press [MENU/SET].
2 Select frames to combine.
¥
Pictures are saved in JPEG format. Recording information (Exif information) of the first
frame such as shutter speed, aperture, and ISO sensitivity are also registered.
[Sequence Composition]
> [Playback] > [Sequence Composition]
Select the frames so that the moving subject will not overlap on the
preceding or subsequent frames. (The sequence composition may not be
created properly if the subject overlaps.)
1 Drag the slide bar or use
3/4/2/1 to select
the frames to combine.
2 Press [MENU/SET].
• The selected frames are remembered, and the
display goes to the preview screen.
• Press 3/4 to select items and press [MENU/
SET] to perform the following operations.
–[Next]:
Lets you select more frames for combining.
– [Reselect]:
Discards the frame selected immediately before and lets you select a different
image.
3 Repeat steps 1 and 2 to select more frames to combine.
• You can select 3 to 40 frames.
4 Press 3/4 to select [Save], and then press [MENU/SET].
Tips for [Sequence Composition]
We recommend using a tripod to take pictures for [Sequence
Composition].
DC-LX100M2PPP-DVQX1572_eng.book 56 ページ ２０１８年８月７日 火曜日 午後５時１０分
To Next Page
Loading...
