246
Wi-Fi/Bluetooth
When sending pictures, first select [New Connection], then select the method of sending
pictures.
→ [Setup] → [Wi-Fi] → [Wi-Fi Function] →
[New Connection] → [Send Images While Recording] /
[Send Images Stored in the Camera]
■
Images that can be sent
Destination JPEG RAW
MP4
*
1
AVCHD
*
1,
*
2
4K Burst File
*
1
Pictures recorded in
[Post Focus]
*
1
[Smartphone] ○
○
*
3
○
*
4
– –
[PC] ○ ○ ○ ○ ○
[AV device] ○ – – – –
[Printer]
*
1
○ – – – –
*
1
Sending by [Send Images While Recording] is not available.
*
2
Files larger than 4 GB cannot be sent.
*
3
An Android 7.0 or higher or iOS 10.0 or higher operating system is required.
*
4
Excluding motion pictures recorded with [Rec Quality] of [4K].
• Some images may not be played back or sent depending on the device.
• For more information about picture playback, see the operating instructions of the
destination device.
[Send Images While Recording]
A picture can be automatically sent to a specified device every time you take it.
• [
] is displayed on the recording screen while connected by
[Send Images While Recording], and [ ] is displayed while
files are being sent.
• To terminate the connection, follow the steps below:
→ [Setup] → [Wi-Fi] → [Wi-Fi Function] → [Yes]
11
• You cannot change the settings while sending a still picture.
Sending pictures
To Next Page
Loading...
