254
Wi-Fi/Bluetooth
About Wi-Fi connections
The following types of connections are available.
→ [Setup] → [Wi-Fi] → [Wi-Fi Function]
[New Connection] A connection is made by selecting a Wi-Fi function and the connected
device. When the following screen is displayed, select either [Via
Network] (→254) or [Direct] (→257) and make a connection.
Wireless access point
[Select a destination
from History] /
[Select a destination
from Favorite]
Connection is made using the same settings as the previous time.
(→258)
Connecting via a wireless access point ([Via Network])
Select a connection method to the wireless access point.
[WPS (Push-Button)]
Save push button type wireless access point that is compatible with
Wi-Fi Protected Setup™ with a WPS mark.
1
Press the wireless access point WPS button until it
switches to WPS Mode
[WPS (PIN code)]
Save PIN code type wireless access point that is compatible with
Wi-Fi Protected Setup with a WPS mark.
1
On the camera screen, select the wireless access point
you are connecting to
2
Enter the PIN code displayed on the camera screen
into the wireless access point
3
Press [MENU/SET] on the camera
[From List]
Select this option when you are not sure about the WPS compatibility,
or when you want to search for and connect to a wireless access
point. (→255)
To Next Page
Loading...
