101
Focus, Brightness (Exposure) and Colour tone Settings
Setting the ISO Sensitivity
Recording mode:
Set ISO sensitivity (sensitivity to lighting).
→ [Rec] → [Sensitivity]
1
Select the ISO sensitivity by rotating the
rear dial
ISO sensitivity
1
25
2
0
AUTO
ISO sensitivity is automatically set in a range up to 3200 (with the
flash on: 4000)
*
1
depending on the brightness of a subject.
(Intelligent ISO)
ISO sensitivity is automatically set in a range up to 3200 (with the
flash on: 4000)
*
1
depending on the movement and brightness of a
subject.
• The shutter speed is not fixed when the shutter button is pressed
halfway. It is continuously changing to match the movement of the
subject until the shutter button is pressed fully.
[L.80]
*
2
/ [L.100]
*
2
/
from [125] to
[12800] / [H.25600]
*
2
ISO sensitivity is fixed at the selected setting.
*
1
When [ISO Auto Upper Limit (Photo)] is set to [AUTO].
*
2
Only when [Extended ISO] is [ON].
2
Press [MENU/SET] to set
• You can also press the shutter button halfway to set.
To Next Page
Loading...
Need help?
General
