240
Wi-Fi/Bluetooth
Controlling with a Smartphone
Transferring recorded images to a smartphone automatically
Wireless connectivity required:
The camera automatically transfers recorded images to a Bluetooth-connected
smartphone via Wi-Fi.
1
Make a Bluetooth connection to the smartphone (→227)
2
Select the camera’s menu
→ [Setup] → [Bluetooth] → [Auto Transfer] → [ON]
• If a confirmation screen is displayed on the camera asking you to terminate the Wi-Fi
connection, select [Yes ] to terminate it.
3
On the smartphone, select [YES] (Android devices) or [Wi-Fi Setup] (iOS
devices)
• The camera automatically makes a Wi-Fi connection.
– (iOS devices) Follow the on-screen message on the smartphone to change the connected
device on the Wi-Fi setup screen.
4
Check the send settings on the camera, and select [Set]
• To change the send setting, press [DISP.] button. (→248)
• The camera will enter a mode where it can automatically transfer images and [
] will be
displayed on the recording screen. (If [Auto Transfer] is not displayed on the recording screen,
images cannot be transferred automatically. Check the status of the Wi-Fi connections to the
smartphone.)
5
Take pictures on the camera
• Every time you take a picture, it is automatically sent to a specified device.
• While sending a file, [
] is displayed on the recording screen.
If you set [Auto Transfer] to [ON] in advance, the Wi-Fi/Bluetooth connection will be
automatically established and Auto Transfer enabled the next time you turn on the camera and
start up “Image App” on your smartphone.
To Next Page
Loading...
Need help?
General
