107
Recording with the 4K Photo function and selecting
pictures to save
Recording with the 4K Photo function
Recording mode:
You can take burst pictures of approximately 8 million pixels with a burst rate of 30 fps.
You can select and save a frame from the burst file.
• To record pictures, use a UHS Speed Class 3 card.
1
Press [ ] button
• The same operation can be performed by pressing
the [ ] button ( ), using to select a 4K photo
icon, and pressing .
2
Press to select the recording method
and press [MENU/SET]
• The recording method can also be set using
[4K PHOTO] in the [Rec] menu.
[4K Burst]
For capturing the best shot of a fast-moving subject
(e.g., sports, aeroplanes, trains)
Audio recording: None
[4K Burst(S/S)]
“S/S” is an abbreviation
of “Start/Stop”.
For capturing unpredictable photo opportunities
(e.g., plants, animals, children)
Audio recording: Available
*
[4K Pre-Burst]
For recording as needed whenever a photo opportunity arises
(e.g. the moment when a ball is thrown)
Audio recording: None
*
Audio is not played back when you perform playback with the camera.
4K Photo and Drive Settings
To Next Page
Loading...
Need help?
General
