119
4K Photo and Drive Settings
Adjusting the focus after recording ([Post Focus]/[Focus Stacking])
4
Press the shutter button fully to start recording
Recording progress bar
• The focus point changes automatically while recording. When the
recording progress bar disappears, recording automatically ends.
• The data will be saved as a single file in the MP4 format.
• If [Auto Review] is set, a screen will automatically appear that lets
you select the focus point. (→120)
â–
Cancelling [Post Focus]
Select [OFF] in step
2
.
• The operation can be cancelled by pressing the [ ] button ( ) and then selecting
[ ] ([Single]) or [ ].
About camera temperature
If the surrounding temperature is high or [Post Focus] recording is performed continuously, [ ] may
be displayed and recording may be stopped halfway through. Wait until the camera cools down.
To Next Page
Loading...
Need help?
General
