193
Using Menu Functions
Menu list
→ [Custom] → [Lens / Others]
Recording tips when registering face pictures
• Make sure the subject’s eyes are open and mouth closed;
have the subject face the camera directly, and make sure
the outline of the face, the eyes and eyebrows are not
hidden by hair.
• Make sure there are no heavy shadows on the face. (During
registration, the flash is not used.)
Good example for registering
a face
If the camera seems to have difficulty recognising faces when recording
• Register additional pictures of the same person’s face, indoors and outdoors or with
different expressions or angles.
• Register additional pictures at the place you are recording.
• If a registered person is no longer recognised, re-register that person.
• In some cases, the camera cannot recognise or incorrectly recognises even registered
people depending on their expression or the environment.
●
[Face Recog.] functions only when Auto Focus mode is set to [ ].
●
Only the first picture of the burst recording will contain Face Recognition information.
●
The name of the person recognised in the first picture is displayed in the case of group pictures.
●
This function is not available in the following cases:
• [Miniature Effect] (Creative Control Mode)
• During motion picture recording
• When recording 4K photos
• When recording using [Post Focus]
• When using [Time Lapse Shot]
To Next Page
Loading...
