~
[i-PORTRAIT]
II!]
[i-SCENERY]
~
[i-MACRO]
II!
[i-NIGHT PORTRAIT]
~
[i-NIGHT SCENERY]
Basic
Press
the
shutter
button
fully
(push
it
in
further), and take
the
picture.
• The access indication (P15) lights
red
when pictures
are being recorded
on
the built-in memory (or the
card).
• When
taking
pictures
using
the
flash (P39)
• When
taking
pictures
using
the
zoom (P32)
oNote
•
Be
careful not to move the camera when you press the shutter button.
•
Do
not cover the flash or the AF assist lamp with your fingers or other objects.
•
Do
not touch the front of the lens.
When
the camera identifies
the
optimum scene, the icon of
the
scene
concerned
is
displayed in blue for 2 seconds, after which its color changes to
the
usual red.
1fl1~
• Only when
[~A]
is selected
• Only when
[@]
is selected
• [Ifll] is set if none of the scenes are applicable, and the standard settings are set.
.If
a tripod is used, for instance, and the camera has judged that camera shake is minimal when
the scene mode has been identified as
[~],
the shutter speed will
be
set to a maximum of
8 seconds.Take care not to move the camera while taking pictures.
• Face
detection
When
[1[iJ]
or
[~]
is selected, the
camera
automatically detects a person's face,
and
it will
adjust the focus and exposure (P63).
Under
backlight conditions, the lighting is automatically corrected so
that the brightness of the faces will be optimal.
oNote
• Due to conditions such as the ones below, a different scene may be
identified for the same subject.
- Subject conditions: When the face is bright or dark, The size of the
subject, The distance to the subject, The contrast of the subject, When the subject is moving,
When zoom is used
- Recording conditions: Sunset, Sunrise, Under low brightness conditions, When the camera is
shaken
•
To
take pictures
in
an
intended scene, it is recommended that you take pictures
in
the
appropriate recording mode.
Backlight refers
to
when
light
comes
from
the
back of a subject.
28 VQT1M97
To Next Page
Loading...
Need help?
General
Weight and Dimensions
