Connecting
to
other equipment
• Connection
in
the
PTP
mode
(Windows®
XP,
Windows
Vista® and Mac
as
x only)
Set
[USB
MODE]
to [PictBridge(PTP)).
Data can
now
be read only from the card into the PC.
•
When
there
are
1000
or
more
pictures
on
a
card,
the
pictures
may
not
be
imported
in
the
PTP
mode.
]
If you connect the camera to a printer supporting PictBridge, you can select the pictures to
be
printed out and instruct that printing be started on the camera's LCD monitor.
Preparations:
Turn on the
camera
and the printer.
Remove the card before printing the pictures in the built-in memory.
Perform the print quality and other settings at the printer before printing the pictures.
Connect
the
camera
to
a
printer
via
the
USB
connection
cable ®
(supplied).
"'I=
...
=!===~"
..
~'"""'--
..t
I .
® USB connection cable (supplied)
• Check the directions of the connectors, and plug them straight
in
or unplug them straight out.
(Otherwise the connectors may
be
bent out of shape which will cause trouble.)
@ Align the marks, and insert.
©
AC
adaptor (DMW-AC5PP; optional)
• Use a battery with a sufficient battery power or the
AC
adaptor (DMW-AC5PP; optional). If the
remaining battery power becomes low while the camera and the printer are connected, the
status indicator blinks and the alarm beeps. If this happens during printing, stop printing at
once.
If
not printing, disconnect the USB connection cable.
• When the camera
is
connected to the printer, the cable disconnect prohibit icon
['W']
appears.
Do
not disconnect the USB cable while
['W']
is
displayed.
Press
I../~
to
select
[PictBridge(PTP)], and then
press [MENU/SET].
~USBMODE
SELECT';
SET
00
VQT1M97
85
To Next Page
Loading...
Need help?
General
Weight and Dimensions
