- 101 -
Recording
You can finely adjust the White Balance when you cannot acquire the desired hue by setting
the White Balance.
•
Fine adjustment is possible only when the White Balance is set to [V]/[Ð]/[î]/[Ñ]/[Ò].
1 Select the White Balance to finely adjust and then press [DISP.] to display
[WB Adjust.].
2 Press 2/1 to adjust the White Balance.
•
Select [0] to return to the original White Balance.
3 Press [MENU/SET] to finish.
• The White Balance icon on the screen turns red or blue.
• The White Balance fine adjustment setting is reflected in the picture when using the flash.
• You can finely adjust the White Balance independently for each White Balance item.
• The White Balance fine adjustment setting is memorized even if the camera is turned off.
• The White Balance fine adjustment level in [Ò] returns to [0] when you reset the White Balance
using [Ó].
• In the Beach & Snorkeling Mode or Advanced Underwater Mode, the White Balance is fixed at
[AWB], but it can be finely adjusted.
• White Balance fine adjustment cannot be set for [B&W] and [SEPIA] in [Color Mode].
Finely adjusting the White Balance
2 [Red]: Press when the hue is bluish.
1 [Blue]: Press when the hue is reddish.
To Next Page
Loading...
Need help?
General
