- 127 -
GPS/Sensor
Switches the displaying and hiding of the location name information displayed on the screen.
1
Select [Area Info. Set] on the [GPS/Sensor] menu, and then press [MENU/
SET].
2
Press 3/4 to select the item to change, and then press [MENU/SET].
3
Select [ON] for the items to display and [OFF] for the items not to display
by pressing 3/4, and then press [MENU/SET].
Additionally register new landmarks in the database of this unit. It can be displayed on the
screen or stored as a positioning result once registered.
1
Select [My Landmark] on the [GPS/Sensor] menu, and then press [MENU/
SET].
2
Press 3/4 to select [None], and then press [MENU/SET].
• Confirmation screen is displayed. Positioning is started when [Yes] is selected.
• Current location information is displayed once the positioning is successful.
3
After confirming the GPS information, press [MENU/SET].
4
Enter landmark name.
• For details on how to enter characters, refer to “Entering Text” on P94.
∫ Change or delete registered landmark names
1 Select registered landmark name in above step 2, and then press [MENU/SET].
2 Press 2/1 to select [Edit] or [Delete], and then press [MENU/SET].
•
Text input screen is displayed when [Edit] is selected. Enter the landmark name again.
• The registered landmark is deleted when [Delete] is selected.
• Up to 50 landmarks can be additionally registered.
• The only information that can be registered is landmark names. Place names such as city, town or
village names cannot be registered.
Switch between displaying and hiding the location name information
Register additional landmarks
To Next Page
Loading...
Need help?
General
