Panasonic lumix DMC-FT6 User Manual

- 202 -
Wi-Fi
1 Press [Wi-Fi].
2 Press 3/4/2/1 to select [New Connection], and
then press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination
from [History Connection] (P179) or [Favorite Connection] (P180).
3 Press 3/4 to select [Send Images Stored in the Camera], and then press [MENU/
SET].
4 Press 3/4 to select [Cloud Sync. Service], and then press [MENU/SET].
5 Press [MENU/SET].
6 Press 3/4 to select [Via Network], and then press [MENU/SET].
7 Press 3/4 to select connection method, and then press [MENU/SET]. (P185)
8 Check the send setting.
•
When the connection is complete, the screen is displayed. To change the send setting, press
[DISP.]. (P192)
9 Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
•
To change the setting or disconnect, press [Wi-Fi]. (P189)
10 Select and send the images. (P200)
When sending images to [Cloud Sync. Service]
Preparations:
You need to register to “LUMIX CLUB” (P206) and configure the Cloud Sync. setting (P195) to
send a picture to a Cloud Folder.

Panasonic lumix DMC-FT6 Specifications

General

Brand	Panasonic
Model	lumix DMC-FT6
Category	Digital Camera
Language	English