- 188 -
Wi-Fi
Playback on TV
You can display pictures on a TV that supports the Digital Media Renderer (DMR) function of
the DLNA standard.
1 Press [Wi-Fi].
2 Press 3/4/2/1 to select [New Connection], and
then press [MENU/SET].
•
When connecting with the setting you used before, you can select the
connection destination from [History Connection] (P179) or [Favorite
Connection] (P180).
3 Press 3/4 to select [Playback on TV], and then press [MENU/
SET].
4 Press 3/4 to select connection method, and then press
[MENU/SET].
5 Press 3/4 to select a device you want to connect, and then press [MENU/SET].
•
When the connection is established, the screen is displayed.
6 Take or play back pictures on this unit.
•
To change the setting or disconnect, press [Wi-Fi]. (P189)
Displaying the picture on TV right after taking it/Displaying the picture on
TV by playing it back on the camera
Preparations:
Set the TV to DLNA waiting Mode.
•
Read the operating instructions for your TV.
• For details on compatible devices, refer to the support sites below.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
[Via Network]
When you want to connect to your TV via an wireless access point.
(P185)
[Direct]
When you want to directly connect your TV to this unit with [Wi-Fi Direct],
[WPS Connection], or [Manual Connection]. (P187)
To Next Page
Loading...
Need help?
General
