Panasonic lumix DMC-FT6 User Manual

- 135 -
GPS/Sensor
Sensors (compass/altimeter/barometer) are
operated
Applicable modes:
The direction, altitude, and atmospheric pressure can be measured and recorded in the
recorded images.
•
If compass/altimeter/barometer are operated in the time settings (P28) at the time of purchase,
[Sensor Settings] will be set to [ON] automatically.
1
Select [Sensor Settings] on the [GPS/Sensor] menu, and then press
[MENU/SET].
2
Press 3/4 to select [ON], and then press
[MENU/SET].
• Exit the menu after it is set.
• To switch the environment information screen, press
[DISP.] several times.
A Compass
B Altimeter
C Latitude
D Longitude
E Time positioning was performed
F Barometer
• When [GPS Setting] is set to [OFF], the latitude/longitude and positioning timing are not displayed.
• They keep working when this unit is turned off. If you do not wish the compass/altimeter/barometer
to keep working when this unit is turned off, set [Airplane Mode] to [ON]. (P53)
• For motion pictures
¢
, the direction, altitude and atmospheric pressure measured at the start of the
recording are recorded.
¢ When recording using [MP4] or [FHD/60p/ ]/[FHD/60i/ ]/[HD/60p/ ] in [AVCHD]
10
0ft
00' 00' 00.00 1013hPa
- 24H 0 H
000' 00' 00.00
GPS
5
0
- 5
- 10
N
E
N
N
10:00 DEC.1.2013
10:00 DEC.1
B
F
D
C
E
A

Panasonic lumix DMC-FT6 Specifications

General

Brand	Panasonic
Model	lumix DMC-FT6
Category	Digital Camera
Language	English